2022 Jeep Wrangler Light Bar Mounting Kit Parts
Choose your Submodel for your 2022 Jeep Wrangler
Rubicon
Sport
Sport S
Unlimited High Altitude
Unlimited High Altitude 4xe
Unlimited High Tide
Unlimited Rubicon
Unlimited Rubicon 392
Unlimited Rubicon 4xe
Unlimited Rubicon Tuscadero
Unlimited Sahara
Unlimited Sahara 4xe
Unlimited Sahara Altitude
Unlimited Sahara High Altitude
Unlimited Sport
Unlimited Sport Altitude
Unlimited Sport S
Unlimited Willys
Unlimited Willys Sport
Willys
Willys Sport
Image
Product
Price
- For Mounting 20 in. Light Bar Behind Plane Of The Bull Bar Textured Black
- WJ2 Bumper Bull Bar LED Light Bar Mount; For Mounting 20 in. Light Bar Behind Plane Of The Bull Bar;
- WJ2 Bumper Bull Bar LED Light Bar Mount
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
-
Features:
- High Quality Sturdy Steel Plate Construction
- Designed So Light Bar Mounts Behind Bull Bar Plane
- Buttonhead Bolts To Match Westin Bull Bar
- Brackets Include 2 Holes For Fit And Durability
- Includes Slots To Accommodate Different Styles Of Light Bars
- Westins WJ2 LED Brackets are constructed with high-strength steel and designed so that 20-inch light bars fit behind the plane of the bull bar for extra protection. They feature buttonhead bolts to match Westin bull bars and include 2 holes for fit and durability. Includes slots to accommodate different styles of 20-inch LED light bars.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Wrangler | Unlimited High Tide |
- For 50 in. LED Light Bar; Heavy-Duty 7 Gauge Steel; Textured Black Textured Black
- Pillar LED Light Mount; For 50 in. LED Light Bar; Heavy-Duty 7 Gauge Steel; Textured Black;
- Pillar LED Light Mount
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
-
Features:
- Made Of 7 Gauge Mild Steel
- Stainless Steel Fasteners For Superior Corrosion Protection
- Lower Pillar Light Mounting Points For Single Post Lights
- Textured Black Finish Complements OEM Vehicle Trim
- Foam Gaskets Included To Protect Vehicle Finish
- Bolt-On Installation
- No Drilling Required
- LED Lights Not Included
- Westins Pillar LED Light Mount is set up for a 50 in. LED Bar at the upper windshield level and post mount lights at the pillar level. They are made of heavy-duty 7 gauge steel and feature visible black stainless fasteners with a textured black powder coat finish.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Wrangler | Unlimited Rubicon Tuscadero |
- Anodized Finish; Billet Aluminum; For Use With DV8 Picatinny Rail System
- Pod Light Mount Bracket; Anodized Finish; Billet Aluminum; For Use With DV8 Picatinny Rail System;
- Pod Light Mount Bracket
-
Features:
- Pod Style Light Mount
- Billet Aluminum
- Finish Anodized
- Sold As Each
- Fits 2007-18 Jeep JK
- This A-pillar Pod Mounting adapter fits the new DV8 Off Road picatinny rail system which features mil-spec, hard-anodized, billet machined, extruded aluminum. Want to mount lights, a GoPro, grab handles, highjack lifts, shovels or a mirror? Our modular system fits the 2007-18 Jeep JK stock hood mount, A-Pillar, roof rail and more hinge mounts to come.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Wrangler | Unlimited Rubicon 392 |
- KIT; Jeep JL A-Pillar+Pro6 Spot Sys
- A-Pillar Light Mount
- 6in. Pro6 Gravity® LED-Pillar Mount-2-Light System-20W Spot Beam-for 18-24 Jeep JL/JT/4xe
- Gravity® Series LED Spot Beam Light
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Designed To Securely Mount
- Easy To Install
- No Drilling Or Fabrication Required
- Complete Bolt On Installation
- FEATURES-2018-2019 Jeep Wrangler JL A-Pillar Light Mount Bracket Set-2 x 20W 6 in. Gravity LED Pro6 Spot Beam Lights-Securely Mount and Attach KC Pro6 LED Lights to Jeep JL A-Pillars-Utilizes OEM Jeep JL Windshield Bolt Locations-Easy Bolt On Install: No Drilling or Modification RequiredLIGHT PERFORMANCE(PER LIGHT)-Raw Lumens: 2,300 lm-Lux @ 10 Meters: 2,150 lx-Candela: 215,000 cd-Beam Distance (Meters): 972mSPECIFICATIONS-Wattage: 20W-LED Source: CREE XPL HD-Amp Draw: 1.63A -Voltage: 9-32V-IP Rating: IP68-Dimensions: W - 6.00 in. x H - 7.00 in. x D - 3.125 in.PARTS INCLUDED-(2) Jeep JL A-Pillar Light Mounts and Hardware-(2) Gravity LED Pro6-(2) KC Pro6 Light Covers-(1) Performance Wiring Harness with Waterproof Connectors and LED Light SwitchOEM FITMENT ON JEEP WRANGLER JLThese high quality brackets were specifically designed for OE 18-19 Jeep Wrangler JL A-Pillar/Windshield locations for an easy light mount solution. Simply attach the brackets to factory bolts located along the A-Pillar/Lower Windshield section of 2018-2019 Jeep Wrangler JLs, to securely mount a pair of KC Gravity LED Pro6 6 in. Spot Beam lights to your Jeep JL.KC GRAVITY LED PRO6 SINGLE JEEP JL A-PILLAR LIGHTS:KC Gravity LED Pro6 Single lights feature efficient Cree LED technology in a Spot Beam pattern for maximum forward distance and off road lighting performance. Gravity LED Pro6 Singles use KC's patented Gravity Reflective Diode system to strategically position LEDs inside precision engineered reflectors so that all light output is being carefully directed and aimed to deliver usable light. What you get is highly targeted light distribution, providing unparalleled clarity, performance and beam shape.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Jeep Wrangler |
- A-Pillar Dual; Brackets With 3mm Steel; Micro-Texture Black Powder Coat Finish
- Pod Light Mount Bracket; A-Pillar Dual; Brackets With 3mm Steel; Micro-Texture Black Powder Coat Finish;
- Pod Light Mount Bracket
-
Features:
- Each Bracket Can Mount Two 3-Inch Pod Lights
- Micro-Texture Black Powder Coat Finish
- No Drilling Installation
- This A-pillar Pod Mounting adapter fits the new DV8 Off Road picatinny rail system which features mil-spec, hard-anodized, billet machined, extruded aluminum. Want to mount lights, a GoPro, grab handles, highjack lifts, shovels or a mirror? Our modular system fits the 2007-18 Jeep JK stock hood mount, A-Pillar, roof rail and more hinge mounts to come.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Wrangler | Unlimited Rubicon 392 |
- 52 in.; Micro-Texture Black Powder Coat Finish
- LED Light Bar Mount; 52 in.; Micro-Texture Black Powder Coat Finish;
- LED Light Bar Mount
-
Features:
- Easy To Install
- Fits Most 50-52in. Led Light Bars
- 4mm High Strength Steel Construction
- Micro-Texture Black Powder Coat
- Concealed Wiring Channels
- Uses Factory Hardware
- The DV8 392/Mojave Edition A-Pillar Light Bar Mount is designed to accommodate an over-windshield LED light bar, with mounting points that are 52- inches apart end to end. The brackets were designed to conceal the wire harness running from the light bar into the engine bay, keeping a clean appearance. Constructed from 4mm high strength steel and finished with a micro-texture black powder coat, these brackets look great and are protected against rust.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Wrangler | Unlimited Rubicon 392 |
- Brackets With 4mm Steel; Micro-Texture Black Powder Coat Finish; Low-Profile; Dual Pod
- Pod Light Mount Bracket; Brackets With 4mm Steel; Micro-Texture Black Powder Coat Finish; Low-Profile; Dual Pod;
- Pod Light Mount Bracket
-
Features:
- Each Bracket Can Mount Up To Two 3-Inch Pod Lights
- Micro-Texture Black Powder Coat Finish
- Hardware Is Included
- No Drilling Installation
- Low Profile Fitment
- Sold As A Pair
- This A-pillar Pod Mounting adapter fits the new DV8 Off Road picatinny rail system which features mil-spec, hard-anodized, billet machined, extruded aluminum. Want to mount lights, a GoPro, grab handles, highjack lifts, shovels or a mirror? Our modular system fits the 2007-18 Jeep JK stock hood mount, A-Pillar, roof rail and more hinge mounts to come.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Wrangler | Unlimited Rubicon 392 |
- For 30 in. Light Bar
- Hood Latch Light Mount Bracket; For 30 in. Light Bar;
- Hood Latch Light Mount Bracket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: State Of California Consumers - Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
-
Features:
- Hood Latch Light Mount Bracket
- Dee Zee Jeep Accessories - A wide range of accessories that allows you a lot of ways to personalize your Jeep. Made from high grade steel or aluminum and then powder coated with our NRT(TM) powder coat gives you confidence your purchase will last for years. NRT(TM) (No Rust Technology) is a specially developed coating that increases corrosion protection. All product mounts to existing factory locations. No drilling required.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Jeep Wrangler |
- For 50 in.; w/Dual-Row Black Series LED; Amber DRL; Upper
- LED Light Bar Windshield Mounting Brackets; For 50 in.; w/Dual-Row Black Series LED; Amber DRL; Upper;
- LED Light Bar Windshield Mounting Brackets
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer; And Birth Defects Or Other Reproductive Harm. For More Information: Www.roughcountry.com/prop65 And Www.p65warnings.ca.gov
-
Features:
- Only Compatible w/50 in. Curved Led Light Bars
- Compatible
- w/Our 50 in. Straight Led Light Bar Kits [#70050-1 And #70950]
- w/Other 50 in. Aftermarket Lights w/A 5/16 in. Or 8-mm Post
- COMMAND THE DARK with Rough Countrys 50- in. LED Upper Windshield Light Bar Kit. This easy-to-install kit is the ultimate solution for adding an aggressive looking, forward-facing lighting system to your Jeep! With its modern, stylistic design and superior strength, this upper windshield mount holds your 50- in. Light Bar between the top of your Wranglers windshield and roof, spanning the entire width of the roof and giving a killer look.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Wrangler | Unlimited Rubicon 392 |
- For 50 in.; w/Dual-Row Black Series LED; White DRL; Upper
- LED Light Bar Windshield Mounting Brackets; For 50 in.; w/Dual-Row Black Series LED; White DRL; Upper;
- LED Light Bar Windshield Mounting Brackets
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer; And Birth Defects Or Other Reproductive Harm. For More Information: Www.roughcountry.com/prop65 And Www.p65warnings.ca.gov
-
Features:
- Only Compatible w/50 in. Curved Led Light Bars
- Compatible
- w/Our 50 in. Straight Led Light Bar Kits [#70050-1 And #70950]
- w/Other 50 in. Aftermarket Lights w/A 5/16 in. Or 8-mm Post
- COMMAND THE DARK with Rough Countrys 50- in. LED Upper Windshield Light Bar Kit. This easy-to-install kit is the ultimate solution for adding an aggressive looking, forward-facing lighting system to your Jeep! With its modern, stylistic design and superior strength, this upper windshield mount holds your 50- in. Light Bar between the top of your Wranglers windshield and roof, spanning the entire width of the roof and giving a killer look.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2022 - Jeep Wrangler | Unlimited Rubicon 392 |
Showing 1 - 10 of 14 products
Loading...